Landlord Electrical Responsibilities in Memphis: What the Law and the Electrical Code Say

Home – Single Post

landlord electrical responsibilities

Landlord electrical responsibilities in Memphis come from two places. Tennessee’s Uniform Residential Landlord and Tenant Act, which applies in Shelby County, requires landlords to comply with building and housing codes materially affecting health and safety and to keep the premises fit and habitable. Memphis and Shelby County’s electrical code then says the owner or the owner’s designated agent is responsible for maintaining the electrical system, and that permitted work must be done by a licensed or registered contractor. This guide explains how the two fit together and offers a turnover checklist that landlords and property managers can use between tenants.

Key Takeaways

  • Landlord electrical responsibilities in Memphis come from the statute’s building and housing code and habitability provisions plus the county’s electrical code, not from a section that lists electrical systems by name.
  • The county’s electrical code makes the owner or the owner’s designated agent responsible for maintaining the electrical system in safe condition.
  • Under the statute, electricity is an “essential service,” and a tenant who gives written notice has remedies if a landlord fails to supply it.
  • The code’s homeowner exception does not cover rentals. Work that needs a permit goes through a licensed or registered contractor.
  • A landlord may not interrupt a tenant’s electricity to regain possession, apart from narrow exceptions in the statute.
  • Keep written notices, photos, permits, and inspection records for every electrical repair.

Where Do Landlord Electrical Responsibilities in Memphis Come From?

Two separate sets of rules apply, and they work together. The state law sets the general duty. The local code says how electrical systems have to be maintained and who can work on them.

The Two Layers

SourceWhat It SaysIn Plain Terms
Tenn. Code Ann. § 66-28-304(a)(1)The landlord shall comply with requirements of applicable building and housing codes materially affecting health and safetyFollow the codes that affect tenant safety
Tenn. Code Ann. § 66-28-304(a)(2)The landlord shall make all repairs and do whatever is necessary to put and keep the premises in a fit and habitable conditionKeep the unit livable
Tenn. Code Ann. § 66-28-502“Essential services” include utility services such as gas, heat, and electricityElectricity is treated as essential
Memphis and Shelby County Joint Electrical Code, § 102.1.2The owner or the owner’s designated agent is responsible for maintaining the electrical system and equipmentThe owner or manager maintains the wiring
Joint Electrical Code, §§ 401 and 402Permits are issued to licensed or registered contractorsPermitted work needs a licensed or registered contractor

You can read the statute in the Tennessee Code text published by the Tennessee Apartment Association, which is current through the 2018 session, and the county’s published electrical code.

Does Tennessee’s Landlord-Tenant Law Apply in Shelby County?

Yes. The Act applies only in counties with a population of more than 75,000, and the commentary in the Tennessee Apartment Association’s published copy of the statute lists Shelby County among them. Memphis Area Legal Services, in a brochure that MLGW distributes, describes the Act as establishing the obligations landlords and tenants must meet when renting residential property in Shelby County.

That brochure reproduces the landlord maintenance section in full and includes a reminder worth repeating. It does not contain the full language of the Act, readers are encouraged to consult the statute itself, and anyone with questions about their rights should seek independent legal advice. The same applies to this guide.

What Does the Statute Say About Electrical Systems?

Less than some summaries suggest. Some online guides describe § 66-28-304 as a list that includes electrical systems. The text reproduced in the MALS brochure does not name them. It requires four things: compliance with applicable building and housing codes materially affecting health and safety, repairs to keep the premises fit and habitable, clean and safe common areas, and waste receptacles in complexes of four or more units.

The electrical duty comes through the first two items. Two definitions in the statute help connect the dots:

  • “Building and housing codes” means any law, ordinance, or governmental regulation concerning fitness for habitation, or the construction, maintenance, operation, occupancy, use, or appearance of any premises or dwelling unit.
  • “Utilities” means the provision of water, electricity, sewer, or natural gas.

An electrical code that regulates how electrical systems are maintained and used appears to fit the first definition. Whether a particular situation counts is a legal question, so treat this as a framework and not a conclusion.

One more detail matters for the order of duties. If the duty to comply with codes is greater than any other duty in that section, the statute says the landlord’s duty is determined by reference to the code provision.

What Does the Memphis and Shelby County Electrical Code Add?

The electrical code is where the practical detail lives. Four provisions matter most to landlords.

Maintenance. Electrical systems, equipment, and materials, both existing and new, are to be maintained in proper operating condition in accordance with their original design and in a safe, hazard-free condition. Safeguards required by the code edition under which they were installed are to stay maintained under that edition. The owner or the owner’s designated agent is responsible for that maintenance, and the Building Official has authority to require electrical systems and equipment to be re-inspected to check compliance.

Service hazards. Where the Building Official finds that an electrical system is a hazard because of inadequate service, improper fusing, insufficient receptacle and lighting outlets, improper wiring or installation, deterioration, or damage, the code says the defects are to be corrected.

Unsafe systems. The code declares an electrical system unsafe if it is a fire hazard or otherwise dangerous to human life. The Building Official can order it removed or restored to a safe condition in writing, and a person may not use or maintain a defective system after receiving that notice.

Enforcement. If a notice of violation is not complied with, the code says the Building Official is to order the serving utility to terminate service to the unsafe parts of the wiring until the notice is complied with and approved.

Why This Matters for Landlords

Code ProvisionPractical Effect
Maintenance responsibilityThe owner or the owner’s agent carries the duty, whoever is living in the unit
Re-inspection authorityThe Building Official can require re-inspection to check compliance
Hazard and unsafe-system provisionsDeterioration, improper fusing, or insufficient outlets can be ordered corrected
Utility termination for noncomplianceIgnoring a notice can lead to service being cut

Which Problems Usually Land on the Landlord?

It depends on the facts and on the lease, but a few patterns hold up under the statute and the code. Use this table as a starting point, not a ruling.

Common Rental Electrical Problems

SituationWho It Usually Falls ToNote
Outlet or circuit with no powerLandlord, after the tenant gives written noticeA tripped breaker or GFCI is often a quick first check. Ace Electric’s outlet troubleshooting guide covers that
Outlet or plug that runs hot, or a scorched outletLandlord, through an electricianMLGW’s winter safety guidance says to unplug a heater whose plug feels hot and have the outlet checked
Panel or breaker problems, burning smellLandlord, through a licensed electricianThe code places maintenance on the owner or agent
Missing or failing protection the code requiresLandlord, to the extent the applicable code requires itTied to the statute’s code-compliance duty
Damage the tenant causedMay fall to the tenantThe statute says tenants may not deliberately or negligently damage, impair, or remove any part of the premises
Light bulbs and similar upkeepOften set by the leaseThe statute lets landlord and tenant agree in writing on specified tasks, in good faith
Storm damage to the weatherhead or meter centerThe property ownerMLGW says these parts are not MLGW property and must be repaired by a licensed electrician and inspected before power is restored

On the last row, MLGW’s outage center explains the rule. MLGW describes the weatherhead as the homeowner’s property, which for a rental points to the property owner.

What Happens When a Tenant Reports an Electrical Problem?

The statute leans heavily on written notice, so the paper trail starts with the first report. Under § 66-28-106, parties give written notice to the address in the lease. Under § 66-28-501, a tenant who gives 14 days’ written notice may seek damages, injunctive relief, and reasonable attorney’s fees for a landlord’s noncompliance. Under § 66-28-502, a tenant who gives written notice of a failure to supply essential services, including electricity, has additional remedies.

From Report to Repair

StepWhat the Statute Says
Written noticeNotice goes to the address in the lease, and the essential-services remedies depend on written notice
Landlord accessThe tenant shall not unreasonably withhold consent for the landlord to enter to inspect or make repairs. In an emergency, the landlord may enter without consent. Access may not be abused or used to harass
If the landlord does not actThe tenant may seek damages, injunctive relief, and attorney’s fees after 14 days’ written notice. For essential services, the tenant may procure the service and deduct reasonable costs, recover damages, or procure substitute housing
If the tenant caused itThe tenant’s rights under the essential-services section do not arise until the tenant shows the condition was not caused by the tenant or others on the premises with consent

The statute also protects tenants from retaliation for using these remedies, so a documented, prompt response is the safer path.

Can a Landlord Shut Off a Tenant’s Electricity?

Not to regain possession. Section 66-28-511 says a landlord may not recover or take possession of the dwelling by action or otherwise, including by willfully diminishing services through interrupting electric, gas, water, or other essential service, except in cases of abandonment, surrender, or as the chapter permits. Section 66-28-504 gives the tenant remedies for unlawful ouster or willful interruption of essential services.

There is a narrow, separate provision for utilities in the landlord’s name. If the lease requires the tenant to put utilities in the tenant’s name and the tenant fails to do so within three days of occupancy, the landlord may have the services terminated if the existing service is in the landlord’s name. That is a different situation from cutting power to force someone out.

Who Can Do the Repairs?

For anything that needs a permit, the county’s code requires a licensed or registered contractor. The code says an owner who wants to install, alter, repair, or replace electrical systems must first hire a licensed or registered contractor, who applies for the permit. Starting before the permit carries an additional fee equal to the permit fee.

The code does include a homeowner exception, but its conditions rule out rentals. It applies to a single-family dwelling that serves as the applicant’s principal residence and is not intended for rent, lease, or resale, with the work done solely by the homeowner or immediate family. A landlord, a property manager’s crew, and a handyman do not fit it.

The statute’s allowance for tenant-performed repairs is also limited. A landlord and tenant may agree in writing that the tenant perform specified repairs or maintenance tasks, but only in good faith and not to evade the landlord’s obligations. That provision does not change the code’s licensing rules for work that needs a permit.

What Should You Check at Turnover?

A turnover is a convenient time to look at the electrical system, because the unit is empty and the work does not disrupt a tenant. These are suggestions drawn from common practice, not code requirements, and anything inside the panel belongs to a licensed electrician.

Electrical Turnover Checklist

AreaWhat to Look ForWho Should Do It
OutletsNo power, loose fit, discoloration, heat damageLandlord or manager can note; an electrician repairs
Switches and platesCracked plates, warm switches, buzzingElectrician for anything beyond a plate swap
GFCI and other protective devicesDevices that trip, will not reset, or fail their testElectrician
Light fixturesLoose mounting, flickering, signs of heatElectrician for wired fixtures
PanelMissing or confusing labels, burn marks, rust, tripping breakersLicensed electrician only
Exterior service equipmentLoose mast, cracked cap, damaged meter boxLicensed electrician, with MLGW coordination as needed
Cords and power strips left behindOverloaded or damaged cordsRemove and replace
RecordsPhotos and a dated note of the conditionLandlord or manager

If you are not sure whether a condition is routine wear or a hazard, an electrician’s inspection gives you a written answer. For service equipment, Ace Electric’s panel upgrade guide explains what that work involves.

What If a Rental Is Damaged by Fire?

The statute covers this. If a dwelling unit or premises is damaged or destroyed by fire or casualty to the point that its use is substantially impaired, the tenant may vacate immediately and must notify the landlord in writing within 14 days of the intent to terminate. If restoring the unit requires the tenant to vacate, the landlord may terminate the rental agreement within 14 days of providing written notice. Prepaid rent and recoverable deposits are returned under the statute’s provisions.

On the electrical side, MLGW’s fire restoration process calls for a licensed contractor to make repairs and ensure the system is safe and up to code, then for the contractor to call MLGW at 729-8630 (option 1) to start a work order. MLGW adds that your local code enforcement office may need to inspect and approve the repairs before service is restored. Do not energize a fire-damaged building yourself. If you are dealing with an active emergency, Ace Electric’s emergency electrician guide covers which problems call for a same-day response.

What If a Unit Sits Empty for a Long Time?

Long vacancies can trigger a re-inspection. The county’s electrical code says that a residential building out of service for 365 days or more cannot have its interior wiring energized without a re-inspection and a certificate from the Building Official. For commercial property the threshold is 90 days. An owner can request the inspection, and repairs the inspector identifies must be done by a licensed or registered electrical contractor under a new permit.

If you own a unit that has been dark for a long time, ask MLGW when service was disconnected and ask the county’s Electrical section whether the rule applies before you set a move-in date.

What Records Should a Landlord Keep?

The statute depends on written notice and the code depends on permits and inspections, so records matter in both directions. Keep:

  • Tenant repair requests and your written responses, with dates
  • Photos from move-in, turnover, and after any repair
  • Invoices from the contractor, in the contractor’s company name
  • Permit numbers and inspection results for any permitted work
  • Notices from the code office, if you ever receive one

Frequently Asked Questions

Who is responsible for electrical repairs in a Memphis rental?

Generally the landlord. Tennessee’s landlord-tenant law requires landlords to comply with building and housing codes materially affecting health and safety and to keep the premises fit and habitable, and the county’s electrical code makes the owner or the owner’s designated agent responsible for maintaining the electrical system. Damage a tenant caused, and tasks the lease assigns in good faith, can fall to the tenant.

Does Tennessee’s landlord-tenant law apply in Shelby County?

Yes. The Act applies in counties with a population above 75,000, and the commentary in the Tennessee Apartment Association’s copy of the statute lists Shelby County. MALS’s brochure also describes the Act as setting the obligations for renting residential property in Shelby County.

Can a landlord turn off a tenant’s electricity?

Not to regain possession. The statute says a landlord may not take possession by willfully interrupting essential services such as electricity, except for abandonment, surrender, or as the chapter permits. Talk to an attorney before interrupting service for any reason.

Does a landlord need a licensed electrician for rental repairs?

For work that needs a permit, yes. The county’s code requires an owner who wants to alter, repair, or replace electrical systems to hire a licensed or registered contractor, who obtains the permit. The homeowner exception does not cover rental property.

Can a tenant fix an electrical problem and deduct the cost from rent?

The statute allows landlord and tenant to agree in writing that the tenant perform specified repairs, but not to evade the landlord’s obligations. Its deduct-from-rent remedy is tied to essential services after written notice. Because permitted electrical work requires a licensed or registered contractor under the county’s code, tenants should not assume they can do electrical repairs themselves. Ask an attorney before relying on either remedy.

What if the unit has been vacant for a long time?

The county’s code requires a re-inspection and certificate before interior wiring is energized in a residential building out of service for 365 days or more. Ask MLGW for the disconnect date and the county’s Electrical section how the rule applies to your unit.

Final Word

Landlord electrical responsibilities in Memphis come down to a chain. The statute requires code compliance and a habitable unit, the county’s electrical code puts maintenance on the owner or the owner’s agent, and anything that needs a permit goes to a licensed or registered contractor. Written notices, prompt repairs, and good records fit that chain.

If you manage rental property in Shelby County and want an electrician to review a unit at turnover, or to look into a repair a tenant has reported, Ace Electric provides residential and commercial electrical inspections and repairs. You can reach the team at (901) 870-3298.

Curated by Ace Electric,
Your trusted electricians in Tennessee.

About Us

Your go-to for 24/7 residential and commercial electrical services in Memphis and Tennessee. With 20+ years of expertise, we ensure safety and satisfaction. Contact us to illuminate your space.

Recent Articles

Trusted 24/7 Electrical Experts

With a steadfast commitment to safety and 24/7 availability, we provide top-tier services for residential, commercial, and industrial clients.

Follow Us :